December 8, 2008

Aileron gap fairings

Category: 3: Wings (Total 309h) — Steffen @ 21:42 — Hours: 3

I have now entered the final phase of the wing construction. All I need to do, is prepare and install the aileron gap fairings and the flap braces. Tonight I finished preparing the aileron gap fairings.

First I riveted the outboard aileron brackets to the aft spars.

Then I clecoed the aileron fairings to the aft spars.

After matchdrilling them, I removed them and deburred the holes and edges.

Last I Installed the wiring ducts. Notice I split the duct in two. This will allow me to get access to the autopilot aileron servo wires in the right wing and the pitot heat wires in the left wing. I will prepare the flap braces next, then prime and install them.

Hacked by ghost-dz