May 4, 2009

Deburring aft fuselage parts

Category: Aft fuselage — Steffen @ 19:54 — Hours: 2.5

So, tonight I started out on the boring job of deburring the aft fuselage parts. First I removed the protection plastic over the skin rivet lines using my soldering iron for cutting.
aft-fuselage-022-400x

aft-fuselage-023-400x

Then I started deburring the rivet holes. I finished deburring all the skin holes inside and out. Still need the stringer and bulkhead rivet holes, and all the skin and stringer edges. Pheew..!

Hacked by ghost-dz