For the past few days, I have assembling the aircraft.
My daughter Emily has also been helping me, so we have been making good progress.

Here she is installing the brake calipers.

We installed the brake lines from the calibers to the firewall.

The pitot and AOA line were also routed to the left wing.

Then the tail was installed…

I installed the strobe light assy, and began routing the cables…

Finally it was time to move the fuselage to the hangar, so we could install the wings.

We positioned the left wing close to the fuselage, so we could pull the wiring through the wing.

A few our later, both wings were installed. 😀