{"id":2000,"date":"2009-09-19T18:35:04","date_gmt":"2009-09-19T17:35:04","guid":{"rendered":"http:\/\/www.rv-7.dk\/?p=2000"},"modified":"2010-01-08T21:25:15","modified_gmt":"2010-01-08T20:25:15","slug":"back-at-it","status":"publish","type":"post","link":"https:\/\/www.rv-7.dk\/?p=2000","title":{"rendered":"Back at it…"},"content":{"rendered":"

After almost 8 weeks away from the project, it felt great to spend a few hours in the shop today. It’s a big thing becoming a parent. It sure messes with your priorities, but I’m sure there will still be room for some RV quality time! \ud83d\ude09<\/p>\n

So anyway, after cleaning up and dusting down the shop, I started working on the F-719 Auxiliary longerons. First thing was to fabricate 2 small angle clips, that will attach the longerons to the firewall angle.
\n\"Fuselage<\/p>\n

\"Fuselage<\/p>\n

Then I trimmed and backdrilled the Auxiliary longerons to the side skins. I followed Brad Olivers<\/a>\u00a0hint, and only drilled the angle clip-to-longeron holes, then marked and drilled the hole from the firewall angle side, so I didn’t have to remove the side skins. They turned out perfect!!
\n\"Fuselage<\/p>\n

\"Fuselage<\/p>\n

\"Fuselage<\/p>\n

\"Fuselage<\/p>\n

Next up was the F-717 lower\u00a0longerons. These a pretty sturdy longerons that go were the sideskins join with the forward bottom skin. First they get cut to length…
\n\"Fuselage<\/p>\n

\"Fuselage<\/p>\n

Then the aft lower flanges get trimmed. This was all for today!
\n\"Fuselage<\/p>\n

\"Fuselage<\/p>\n