{"id":2041,"date":"2009-10-31T22:16:34","date_gmt":"2009-10-31T21:16:34","guid":{"rendered":"http:\/\/www.rv-7.dk\/?p=2041"},"modified":"2010-01-08T21:24:56","modified_gmt":"2010-01-08T20:24:56","slug":"f-796b-shims","status":"publish","type":"post","link":"https:\/\/www.rv-7.dk\/?p=2041","title":{"rendered":"F-796B Shims"},"content":{"rendered":"

I finally made it back to the shop for a few hours today. It felt great! \ud83d\ude00
\nI started out by reinstalling the Gear Attach Webs and the F-902 Bulkheads.
\n\"Fuselage<\/p>\n

The .040 shims in place…\"Fuselage<\/p>\n

Then I started fabricating the F-796B Shims, to me they look more like angles!!! \ud83d\ude42
\nI used the pieces that I trimmed of the fuselage longerons for this.
\n\"Fuselage<\/p>\n

This is how the plans look for these…
\n\"Fuselage<\/p>\n

After a lot of trimming this is what I\u00a0ended up with. I had to trim about 1\/8″ more of them to make them fit. It seems to be a common problem that the plans are a bit off on these. Ah well, it’s to the safe side! \ud83d\ude42
\n\"Fuselage<\/p>\n

\"Fuselage<\/p>\n

Next I fabricated the F-796B and C Spacers.
\n\"Fuselage<\/p>\n

\"Fuselage<\/p>\n

I used Brad Olivers<\/a> trick for holding them in place.
\n\"Fuselage<\/p>\n

I thought I was supposed to fit the steel tank attach plate now, but the plans didn’t mention them in the current chapter. After reading on for a bit, I found them in the wing installation chapter. It makes sense to me waiting until then, so I can make the neccessary final adjustment. Next up is the rudder pedals. How cool is that?! \ud83d\ude00
\n\"Fuselage<\/p>\n