{"id":2361,"date":"2010-07-27T22:23:48","date_gmt":"2010-07-27T21:23:48","guid":{"rendered":"http:\/\/www.rv-7.dk\/?p=2361"},"modified":"2010-07-31T22:35:06","modified_gmt":"2010-07-31T21:35:06","slug":"cockpit-floor-final-adjustments","status":"publish","type":"post","link":"https:\/\/www.rv-7.dk\/?p=2361","title":{"rendered":"Cockpit floor final adjustments"},"content":{"rendered":"

So, made another few adjustments tonight, even managed to set a few rivets.<\/p>\n

I had brought home the hand squeezer, so I could set the last rivets in the firewall
\nF-684 Gussets.
\n\"\"<\/p>\n

I had to modify the squeezer yoke a little bit for access.
\n\"\"<\/p>\n

There we go…
\n\"\"<\/p>\n

\"\"<\/p>\n

\"\"<\/p>\n

Next I fitted the firewall and\u00a0cockpit floor.
\n\"\"<\/p>\n

I cleco’d the hardware for the forward wing attachment.
\n\"\"<\/p>\n

Then I drilled and countersunk the bottom holes for the screws.
\n\"\"<\/p>\n

\"\"<\/p>\n

After that, I removed the cockpit floor again and set the F-902 Bulkhead to\u00a0lower\u00a0longeron rivets.
\n\"\"<\/p>\n

Also set the center floor stiffener forward rivets..
\n\"\"<\/p>\n

…and the forward two of the aft rivets. I gonna remove the bolts temporary, to set the aft ones.
\n\"\"<\/p>\n

Speaking of bolts, the last thing\u00a0I did, was\u00a0install the\u00a0lower\u00a0longeron-to-firewall bolts.
\n\"\"<\/p>\n