{"id":2670,"date":"2011-01-10T22:26:38","date_gmt":"2011-01-10T21:26:38","guid":{"rendered":"http:\/\/www.rv-7.dk\/?p=2670"},"modified":"2011-01-10T22:30:00","modified_gmt":"2011-01-10T21:30:00","slug":"drilling-aft-deck","status":"publish","type":"post","link":"https:\/\/www.rv-7.dk\/?p=2670","title":{"rendered":"Drilling aft deck"},"content":{"rendered":"

After more than two months away from the project, I finally found the energy\u00a0this weekend to\u00a0start building again.
\nI set out to get the fuselage leveled out and getting the aft deck drilled.<\/p>\n

Here the aft deck is clamped to the aft fuselage, and the fuselage is leveled.
\n\"\"<\/a><\/p>\n

\"\"<\/a><\/p>\n

Leveling the forward end…
\n\"\"<\/a><\/p>\n

After I was happy with the result, I drilled the aft deck to the fuselage.
\n\"\"<\/a><\/p>\n

I desided to go a little ahead in the plans and fabricate the spacers that go under the aft deck…
\n\"\"<\/a><\/p>\n

\"\"<\/a><\/p>\n

\"\"<\/a><\/p>\n

\"\"<\/a><\/p>\n

\"\"<\/a><\/p>\n

Spacers in place ready for drilling…\"\"<\/p>\n

…drilled!
\n\"\"<\/p>\n

Sunday night I spent a couple of hours with my good buddy Bent, making this fuselage stand bracket. My plan is to use the engine stand I got for x-mas as a rotating\u00a0fuselage stand.
\n\"\"<\/a><\/p>\n

\u00a0<\/p>\n