{"id":2691,"date":"2011-01-23T20:56:38","date_gmt":"2011-01-23T19:56:38","guid":{"rendered":"http:\/\/www.rv-7.dk\/?p=2691"},"modified":"2011-01-28T21:00:24","modified_gmt":"2011-01-28T20:00:24","slug":"gussets-and-brackets","status":"publish","type":"post","link":"https:\/\/www.rv-7.dk\/?p=2691","title":{"rendered":"Gussets and brackets"},"content":{"rendered":"

Yesterday I removed and deburred the aft deck parts.
\n\"\"<\/p>\n

I also matchdrilled the aft bulkhead to the deck.
\n\"\"<\/a><\/p>\n

After that\u00a0I dug out and\u00a0the\u00a0\u00a0F-757 plates…
\n\"\"<\/a><\/p>\n

<\/a>These plates need a square hole for the canopy latches.
\n\"\"<\/a><\/p>\n

\"\"<\/a><\/p>\n

Today I clecoed them in place, marked the holes and drilled them.
\n\"\"<\/a><\/p>\n

\"\"<\/a><\/p>\n

Next up was the longeron to firewall gussets.
\n\"\"<\/a><\/p>\n

These needed a little trimming and shaping\u00a0to fit nicely…
\n\"\"<\/a><\/p>\n

…much better! \ud83d\ude42\"\"<\/a><\/p>\n

Some of the holes are drilled with #40 for now, I will borrow the rivet spacing fan from work tomorrow to drill the rest.
\n\"\"<\/a><\/a><\/p>\n