{"id":2708,"date":"2011-01-26T22:24:45","date_gmt":"2011-01-26T21:24:45","guid":{"rendered":"http:\/\/www.rv-7.dk\/?p=2708"},"modified":"2011-01-26T22:25:29","modified_gmt":"2011-01-26T21:25:29","slug":"finished-preparing-f-695-gussets","status":"publish","type":"post","link":"https:\/\/www.rv-7.dk\/?p=2708","title":{"rendered":"Finished preparing F-695 Gussets"},"content":{"rendered":"

<\/a>I had 2 quite productive hours tonight. First I marked the holes for the F-695\u00a0gussets-to-longeron rivets. I wasn’t able to use the rivet spacing fan after all, as the rivets\u00a0were to close…\u00a0
\n\"\"<\/p>\n

Then I drilled them to #40.
\n\"\"<\/a><\/p>\n

With the pilot holes drilled, I clecoed them back in place, and matchdrilled the longerons and firewall brackets to #40. I used of Boelube for drilling through the steel bracket,\u00a0love that stuff! \ud83d\ude42
\n\"\"<\/a><\/p>\n

After that, it only took a few minutes to enlarge them to #30
\n\"\"<\/a><\/p>\n

Finally a spent a little while finetuning the fuselage stand bracket, and welding on the turning plate.
\n\"\"<\/a><\/p>\n

It is not much, but I think I will go ahead and prime this batch, so I can get these riveted before putting the fuselage in the stand. Maybe tomorrow… \ud83d\ude00
\n\"\"<\/a><\/p>\n