{"id":2954,"date":"2012-08-08T20:59:07","date_gmt":"2012-08-08T19:59:07","guid":{"rendered":"http:\/\/www.rv-7.dk\/?p=2954"},"modified":"2012-08-08T21:00:14","modified_gmt":"2012-08-08T20:00:14","slug":"seat-backs","status":"publish","type":"post","link":"https:\/\/www.rv-7.dk\/?p=2954","title":{"rendered":"Seat backs"},"content":{"rendered":"

\u00a0Yesterday I started working on the seat backs. They are made up of these skins, reinforced by angles.\"\"<\/p>\n

Here the\u00a0are the 4 vertical stiffeners cut to lenght.\"\"<\/a>
\n<\/a><\/p>\n

At the upper ends, the stiffeners gets rounded like this:
\n\"\"<\/a><\/p>\n

\"\"<\/p>\n

..and at the lower ends they get angled like this:
\n\"\"<\/a><\/p>\n

At the lower ends, a recess is also needed to make room for the hinge.
\n\"\"<\/a><\/p>\n

Like this:
\n\"\"<\/a><\/p>\n

\"\"<\/a><\/p>\n

\u00a0After measuring out the rivet spacing, drilling and match drilling, the seatbacks are slowly coming together. Still need the horizontal stiffeners and upper hinge parts.
\n\"\"<\/a><\/p>\n