{"id":2977,"date":"2012-08-10T23:01:47","date_gmt":"2012-08-10T22:01:47","guid":{"rendered":"http:\/\/www.rv-7.dk\/?p=2977"},"modified":"2012-08-13T05:42:34","modified_gmt":"2012-08-13T04:42:34","slug":"seat-backs-day-2","status":"publish","type":"post","link":"https:\/\/www.rv-7.dk\/?p=2977","title":{"rendered":"Seat backs, day 2"},"content":{"rendered":"

Today I finished making and\u00a0drilling\u00a0all the parts for the seatbacks. All there’s left now is deburring and primer. I’m really looking forward to rivet all this stuff together. \ud83d\ude42<\/p>\n

The upper horizontal seatback stiffeners get rounded to fit into the skin bend.
\nHere is photos of before and after:
\n\"\"<\/a><\/p>\n

And the stiffener in position…
\n\"\"<\/a><\/p>\n

Next up was the seat back lower attachment hinges. I have borrowed a rivet spacing tool from work, great tool!
\n\"\"<\/a><\/p>\n

Then I transferred the hinge holes to the seatbacks…
\n\"\"<\/a><\/p>\n

…and the lower seatback stiffeners, which goes on the back.
\n\"\"<\/a><\/p>\n

Then I drilled the top stiffeners; first I matchdrilled the upper holes from the vertical stiffeners, then I used the lower stiffeners as drill guide, and finally I matchdrilled them to the seatbacks.
\n\"\"<\/a><\/p>\n

\"\"<\/a><\/p>\n

The upper hinges in place:
\n\"\"<\/a><\/p>\n

These plates will attach to the upper hinges, giving the seatback 2 reclining positions.\u00a0 It will all make sense soon! \ud83d\ude09
\n\"\"<\/a><\/p>\n

Hinges for the plates are ready, and pilot holes for lightning holes are drilled.
\n\"\"<\/a><\/p>\n

Lightning holes complete!\u00a0\"\"<\/a><\/p>\n

The side flanges gets shaped like this:\u00a0\"\"<\/a><\/p>\n

…and the hinge has been drilled. That’s it for today…
\n\"\"<\/a><\/p>\n