{"id":3014,"date":"2012-08-13T22:09:24","date_gmt":"2012-08-13T21:09:24","guid":{"rendered":"http:\/\/www.rv-7.dk\/?p=3014"},"modified":"2012-08-16T05:40:15","modified_gmt":"2012-08-16T04:40:15","slug":"seatback-floor-riveting","status":"publish","type":"post","link":"https:\/\/www.rv-7.dk\/?p=3014","title":{"rendered":"Seatback & floor riveting"},"content":{"rendered":"

Having primed all the parts for the seatbacks and seat floors, I was looking forward to getting home and start riveting again. It has been way to long with no progress, it feels great to be back at\u00a0 it! \ud83d\ude00<\/p>\n

First I clecoed and riveted the seatback attach hinges.
\n\"\"<\/a><\/p>\n

I put the aft floors in my vice, while riveting. Easy enough!
\n\"\"<\/a><\/p>\n

\"\"<\/a><\/p>\n

Then I riveted the aft floors, and installed the forward floors. The forward floors are attached with screws so they\u00a0are removable for maintenance.
\n\"\"<\/a><\/p>\n

Riveted and installed the elevator control tunnel cover…
\n\"\"<\/a><\/p>\n

\"\"<\/a><\/p>\n

Then it was time for the seatbacks. I began by riveting the hinges to the seat back supports.
\n\"\"<\/a><\/p>\n

\"\"<\/a><\/p>\n

Then I clecoed the seatbacks together…
\n\"\"<\/a><\/p>\n

And riveted them. I could reach all rivets except the upper hinge ones with my squeezer.
\n\"\"<\/a><\/p>\n

There we go!! \ud83d\ude00
\n\"\"<\/a><\/p>\n

\"\"<\/a><\/p>\n

\"\"<\/a><\/p>\n

This picture really shows how the supports work. Note that there is two slots for the support to rest in.<\/p>\n

\"\"<\/a><\/p>\n