{"id":3177,"date":"2015-05-06T22:31:14","date_gmt":"2015-05-06T21:31:14","guid":{"rendered":"http:\/\/www.rv-7.dk\/?p=3177"},"modified":"2015-05-27T18:46:03","modified_gmt":"2015-05-27T17:46:03","slug":"forward-covers-part-2","status":"publish","type":"post","link":"https:\/\/www.rv-7.dk\/?p=3177","title":{"rendered":"Forward covers, day 2"},"content":{"rendered":"

Today I finished preparing the forward covers, angles and gussets.
\nFirst I removed the forward seat floors for better access…
\n\"Fuselage<\/p>\n

Then I clecoed the angles in place, marked the cut-outs and drilled the screw holes.
\n\"Fuselage<\/a><\/p>\n

Then I removed it all again and\u00a0drilled holes for nutplates.
\n\"Fuselage<\/a><\/p>\n

…then clamped the angles to a piece of wood, and trimmed away the cut-out with my unibits.
\n\"Fuselage<\/a><\/p>\n

\"Fuselage<\/a><\/p>\n

\"Fuselage<\/a><\/p>\n

When preparing the gussets, I had to make a small cut-out to make room for a rivet.
\n\"Fuselage<\/a><\/p>\n

\"Fuselage<\/a><\/p>\n

Covers, angles & gussets deburred and ready for primer.
\n\"Fuselage<\/a><\/p>\n

Next project is the fuel pump housing…
\n\"Fuselage<\/p>\n

\n