{"id":4398,"date":"2020-03-15T18:53:27","date_gmt":"2020-03-15T17:53:27","guid":{"rendered":"http:\/\/www.rv-7.dk\/?p=4398"},"modified":"2020-07-07T20:09:55","modified_gmt":"2020-07-07T19:09:55","slug":"roll-bar-assy-aft-fuselage-fwd-top-skin","status":"publish","type":"post","link":"https:\/\/www.rv-7.dk\/?p=4398","title":{"rendered":"Roll bar assy & aft fuselage fwd top skin"},"content":{"rendered":"

During the last couple of weeks, I have prepared a few parts for primer, like the F704K Side Bulkhead Covers, and the cover for the roll bar support channel.
\n\"\"<\/a><\/p>\n

I also riveted the support channel to the roll bar assembly. After that, I primed those parts again.
\n\"\"<\/a>
\n<\/span><\/p>\n

With the side bulkhead covers primed, I could blind rivet them into position.
\n\"\"<\/a><\/p>\n

After the primer had cured, I painted the roll bar assy and aft fuselage top skin.
\nI used the same <\/span> color as I used for my engine and for the canopy. My plan is to use this color for everything inside the cabin, from the canopy level and up. For everything below that, including the instrument panel, I plan on using a matte silver metallic. I might change my mind if it looks awful.. \ud83d\ude09
\n\"\"<\/a><\/p>\n

\u00a0 \u00a0 \"\"<\/a><\/p>\n