{"id":5171,"date":"2021-08-03T22:44:00","date_gmt":"2021-08-03T21:44:00","guid":{"rendered":"https:\/\/www.rv-7.dk\/?p=5171"},"modified":"2021-08-03T22:44:54","modified_gmt":"2021-08-03T21:44:54","slug":"baffle-riveting","status":"publish","type":"post","link":"https:\/\/www.rv-7.dk\/?p=5171","title":{"rendered":"Baffle riveting"},"content":{"rendered":"

I went and primed all the baffle parts on sunday, and today I finally had time to rivet it all together.
\n\"\"<\/a><\/p>\n

First part I riveted, was the oil cooler support rod.
\n\"\"<\/a><\/p>\n

Next I riveted the left forward baffle…
\n\"\"<\/a><\/p>\n

..then the right.
\n\"\"<\/a><\/p>\n

Finally riveted the left and right aft baffles.
\n\"\"<\/a><\/p>\n

\"\"<\/a><\/p>\n

Heres a photo of all the completed baffles.
\n\"\"<\/a><\/p>\n

Before applying the final topcoat, I desided to cut the hole for the cabin heat air duct.
\n\"\"<\/a><\/p>\n

\"\"<\/a><\/p>\n

\"\"<\/a><\/p>\n

\n