{"id":5421,"date":"2022-01-13T19:27:04","date_gmt":"2022-01-13T18:27:04","guid":{"rendered":"https:\/\/www.rv-7.dk\/?p=5421"},"modified":"2022-01-13T19:28:14","modified_gmt":"2022-01-13T18:28:14","slug":"avionics-2","status":"publish","type":"post","link":"https:\/\/www.rv-7.dk\/?p=5421","title":{"rendered":"Avionics #2"},"content":{"rendered":"

Garmin recommends adding fuses to the shunt sense wires, so I added them in the lower corner of the subpanel.
\n\"\"<\/a><\/p>\n

\"\"<\/a><\/p>\n

Next I routed the static line from the static ports to the ADAHRS and backup ASI and altimeter.
\n\"\"<\/a><\/p>\n

\"\"<\/a><\/p>\n

It was time to start making the garmin wiring. I began by making the PFD to ADAHRS cable.
\n\"\"<\/a><\/p>\n

With that cable installed, I couldn’t resist wiring the power for PFD, and turning it on for the first time. I still have a lot of wiring to do, but it is great to finally see it powered up. \ud83d\ude00
\n\"\"<\/a><\/p>\n

I decided to place the magnetometer on the aft deck, like Garmin recommends. I made a small mounting plate for it.
\n\"\"<\/a><\/p>\n

\"\"<\/a><\/p>\n

\"\"<\/a><\/p>\n