{"id":5467,"date":"2022-02-28T16:30:57","date_gmt":"2022-02-28T15:30:57","guid":{"rendered":"https:\/\/www.rv-7.dk\/?p=5467"},"modified":"2022-02-28T16:30:57","modified_gmt":"2022-02-28T15:30:57","slug":"avionics-5","status":"publish","type":"post","link":"https:\/\/www.rv-7.dk\/?p=5467","title":{"rendered":"Avionics #5"},"content":{"rendered":"

During the past week, I have finished wiring the engine pressure sensors and the fuel flow sensor, and prepared the oil temp sensor wire.
\n\"\"<\/a><\/p>\n

With those sensors wired, I could complete yet another plug on the engine monitoring unit.
\n\"\"<\/a><\/p>\n

Next I continued with the trim and flap relay wiring. I added a quick disconnect to the airframe wiring…
\n\"\"<\/a><\/p>\n

..which allowed me to wire the relays on the bench.
\n\"\"<\/a><\/p>\n

The relays reinstalled..
\n\"\"<\/a><\/p>\n

Finally I installed the stick gribs to determine the cable lengths, and installed the last quick disconnects.
\n\"\"<\/a><\/p>\n

It is nice to have all these done, and great to be able to remove it without cutting wires.
\n\"\"<\/a><\/p>\n