{"id":6248,"date":"2023-07-12T21:46:44","date_gmt":"2023-07-12T20:46:44","guid":{"rendered":"https:\/\/www.rv-7.dk\/?p=6248"},"modified":"2023-07-13T21:12:20","modified_gmt":"2023-07-13T20:12:20","slug":"final-assembly","status":"publish","type":"post","link":"https:\/\/www.rv-7.dk\/?p=6248","title":{"rendered":"Final assembly 1"},"content":{"rendered":"

For the past few days, I have assembling the aircraft.
\nMy daughter Emily has also been helping me, so we have been making good progress.<\/p>\n

Here she is installing the brake calipers.
\n\"\"<\/a><\/p>\n

We installed the brake lines from the calibers to the firewall.
\n\"\"<\/a><\/p>\n

\"\"<\/a><\/p>\n

\"\"<\/a><\/p>\n

The pitot and AOA line were also routed to the left wing.
\n\"\"<\/a><\/p>\n

Then the tail was installed…
\n\"\"<\/a><\/p>\n

\"\"<\/a><\/p>\n

\"\"<\/a><\/p>\n

\"\"<\/a><\/p>\n

I installed the strobe light assy, and began routing the cables…
\n\"\"<\/a><\/p>\n

Finally it was time to move the fuselage to the hangar, so we could install the wings.
\n\"\"<\/a><\/p>\n

We positioned the left wing close to the fuselage, so we could pull the wiring through the wing.
\n\"\"<\/a><\/p>\n

A few our later, both wings were installed. \ud83d\ude00
\n\"\"<\/a><\/p>\n